(Compound) heat preserving lightweight wall panel adopts the newly high technology from South Korea, which is produced with the policy of lower investment but higher profit. The production line is made up ofEPS pre-expander machine,JQ2000 lightweight aggregate mixer, ZP120 foam blowing machine, slurry-infusing container, hydraulic wall panel machine, moving automatic stacker It includes five systems:Batching System,Mixing System, Slurry-infusing System, Molding System, and Automatic Demoulding System. ▲Batching System It includes four parts: silo, screw conveyor, electronic scale and aggregate bunkers. ▲Mixing System It includes two parts: JQ1000 Lightweight aggregate mixer and ZP 120 foam blowing machine. ▲Slurry-infusing System It includes two parts: pressure vessel and air compressor. ▲Molding System The molding system adopts hydraulic pressure as motivate, which has specialty of reasonable structure, easy operation, high productivity, beautiful outlook; the machine is leading the w...

Wall Panel Production Line Regarding the lightweight wall panel production line, below information is for your reference: 1.We are the first supplier in China for the wall panel machine, our company has almost 25 years history; 2.We can provide many technologies wall panel production lines for customers’ choice, there are Horizontal type and Vertical line, has manual, semi-auto, and auto line. Customers can choose according to their capacity request and investment budget. Difference between Vertical wall panel line and Horizontal wall panel line Horizontal type line enhances the working performance on the basis of the vertical line. Not only avoid some security operational risks of the vertical line, also enhance the production line working efficiency. The horizontal line also can be reserved an automatic quantitative slurry infusing system, auto mold & face board installation system, auto mold cleaning & oil spraying system etc.. Production line specific difference a...

Pakistan, the good neighbor of China, a large population in South Asia, A mysterious and vibrant land,  in recent years, with the support of the "one belt and one way" China policy, all aspects of social and economic development have been greatly developed, especially in terms of infrastructure. Achievements, take this opportunity, in the field of construction machinery at home and abroad has more than a well-known professional producer: Quanzhou city Sanlian Machinery Manufacture Co., Ltd., is fully prepared, continuously improve and optimize marketing channels, the company's three major advantages: fully automatic concrete block making machine, concrete batching plant, EPS sandwich wall panel production line has brought this new hot soil. Considering it is an important new market for the company, S.L Machinery has participated in BUILD ASIA Exhibition in Karachi, the largest city, starting with professional construction exhibitions. We met a large number of Pakistani domestic bu...

Today, Let is talk something about Lightweight sandwich wall panel. Lightweight wall panel is specific produced for modern architecture, ecological residence, frame structure and lower construction, the birth of wall panel marks the renewal of the wall material, new leap has been made in the modernization of wall materials. The birth of this product replaces the traditional block process, it meets the wall material requirements with new energy saving energy and waste building concept and excellent performance of the modern building. Wall panel is composed of cement, fly ash, EPS (expanded polystyrene foam particles), foam agent, and some additives (hydroxymethyl cellulose, reusable dispersion emulsion powder),  mixing with water according to certain proportion, then grouting and forming.face board can use cement board, calcium silicate board, plasterboard or glass magnesium board. Lightweight sandwich wall panel is not only widely used in various kinds of high and multi-storey non...

Foam concrete block is foamed by the foaming machine. The foam agent is fully foamed by mechanical way , and the bubles mixed with cement evenly, then injected into the mold, forming a new lightweight thermal insulation material which contains a large number of closed pores. It is a bubble like insulation material, which is characterized by the formation of closed foam holes so that the foam concrete blocks are lightweight and heat-insulation. Main raw materials: cement, fly ash, fiber, foam agent, and additives. These raw materials are mainly inorganic. There are no harmful substances and no odor. No decomposition in the application process, which is green and environmentally. The foaming agent is neutral and without harmful substances such as benzene and formaldehyde, it avoid environmental pollution and potential fire hazards. It is the best choice for the insulation building. The process of production Material weighing - material mixing (adding foam agent, additives, etc.) - materi...

1.Traditional construction wall materials production and land loss   The traditional construction wall raw materials mainly come from farmland, which requires a lot of soil and large land occupation. At present, There are more than 120,000 domestic clay brick and tile enterprises predominantly in producing solid clay brick. They cover more than 0.83 million acres, and produce nearly 700 billion clay brick each year, occupying 1.4 billion m3 of soil, which is equivalent to destroy 0.2 million acres of soil field. According to the statistics, due to burned clay brick, up to 140,000 hectares of farmland have been damaged since the founding of P.R.C.  2.Traditional construction wall materials production and energy consumption   The energy consumption of clay brick production in China has averaged more than twice in the developed countries, with its architectural exterior wall insulation properties 4-5 times. Based upon the statistics, the current energy consumption of domestic c...

Light Weight Wall Panel, Hollow Block, AAC Block Specification Comparison Light Weight Wall Panel, Hollow Block, AAC Block Time Comparison A comparison of the time taken to build finished and ready to paint on both sides （wall area 16 sqm）

Introduction on raw material of lightweight EPS wall panel     Since ancient times masonry walls are the main component in the housing sector and it has brittle characteristics and exhibit poor performance against the uncertain loads. Further, the structure requires heavier sections for carrying the dead weight of masonry walls. S.L Machinery develops a simple, lightweight and cost effective technology for replacing the existing wall systems. The lightweight concrete is developed for the construction of sandwich wall panel. The EPS beads of 4-6 mm diameter size are mixed with cement concrete and developed a lightweight concrete with a density 9 kN/m³. Sandwich wall panel is composed of cement, fly ash, EPS (expanded polystyrene foam particles), foam agent and additives (such as hydroxymethyl cellulose, reusable dispersion emulsion powder, water reducing agent etc.), mixing with water according to certain proportion, then grouting and forming. The lightweight sandwich pan...

Production Process on wall panel machine production line 1, Wall Panel Machine Production line Introduction With the policy of lower investment but higher profit, (Compound) heat preserving lightweight wall panel production adopts S.L Machinery’s latest high technology, who was awarded the First Set Significant Technical Equipment Identification and Pioneering National Wall Innovation Benchmarking Enterprises. It includes six systems: EPS Expanding System, Batching & Mixing System, Slurry-infusing System & Molding System, and Transition System, Demolding & Stacking System, PLC Control System. ▲EPS Expanding System It includes steam boiler、air compressor、EPS pre-expander、Fluidized bed、EPS silo. ▲Batching & Mixing System, It includes six parts: Mixing part、Weighing system、Air bubbles forming system、Maintenance  platform、Water supply system、Computer control system. ▲Slurry-infusing System & Molding System Automatic infusing pump for storage of infusing material, w...

DURING THE INDUSTRIAL REVOLUTION of the 18th and 19th centuries, the basic materials of construction were sparse. There was wood, stone, brick and mortar, and iron and steel. However, the irons and steels of that day were vastly inferior to the ones used today. With the progress of human civilization and the pursuit of a better quality life, today S.L Machinery perfectly combined the technology of Lightweight wall panel material and steel structure by launching the lightweight concrete wall panel making machine.     Lightweight concrete is now an established lightweight building material. It is used not only on account of its light weight but also because of high thermal insulation compared with normal concrete. The lighter the concrete, the larger the insulation properties in general. An earliest application of lightweight concrete was in building industry and for producing insulating screeds. The principal structural use of lightweight concrete is in construction of under b...

Introduction on Light Weight Foam concrete Plant The light weight foam concrete block is a kind of foaming agent that is fully foamed mechanically through the foaming system of the foaming machine, and the foam is uniformly mixed with the cement slurry, and then injected into the mold to be formed. It is formed by natural curing, a new type of lightweight thermal insulation material with a large number of closed pores. It is a bubble-shaped heat-insulating material, and its outstanding feature is that the closed foam cells are formed inside the concrete, so that the foamed concrete block can achieve the effect of light weight and thermal insulation.    The light weight foam concrete is prepared by directly adding hydrolyzed natural resin foaming agent to cement concrete or prefabricating a large amount of foam without adding perlite, polypropylene EPS beads and other materials. The main feature of this kind of foam is that its water absorption rate is less than 5%, no connect...

Introduction on Mixer for Wall Panel Machine Production Line Lightweight wall panel machine production line is composed of mixer, feeding system, slurry-infusing machine, moulding machine and wall panel transporting cart, etc. We would like to introduce our mixer in details. 1．Mixer JQ1000/JQ2500 lighteweight aggregate forcing mixer is designed specially for cement board compound heat preserving lightweight wall panel machine production line with advantages as reasonable construction, efficient, mixing of fine quality, lightweight, convenient maintenance, automatic charging and discharging, automatic measure, etc. It is mainly composed of mixing components, measuring components, steep making machine, water supplying system and maintaining platform. 2. Mixing component Mixing component is composed of mixing tank, lie shaft and drive system. There are mixing shaft and leaves in the round mixing tank. Aggregates rotate quickly and continuously with Leaves, so aggregate are mixed efficient...